Uncategorized
-
-
-
-
ASSEMBLY–CRANKCASE GUARD ASSY / PROTECTOR BLADE ASSY w/BOLT AND NUT
$54.18PROTECTOR BLADE - NLA EVERYWHERE; KEPT ON B/O; WILL AIM TO SOURCE -
-
-
ASSEMBLY–DAMPER ROD (PR)* c/w ROD. TUBE. BUSHES. CIRCLIPS. NUTS ETC
$181.44ASSEMBLY--DAMPER ROD (PR)* c/w ROD, TUBE, BUSHES, CIRCLIPS, NUTS ETC -
-
-
-
-
-
ASSEMBLY–DRAIN PLUG c/w O-RING – CRANKCASE – FILTRO MAGNETICO (MADE IN ITALY)*
$27.62ASSEMBLY--DRAIN PLUG c/w O-RING - CRANKCASE - FILTRO MAGNETICO (MADE IN ITALY)* -
-
ASSEMBLY–DRAIN PLUG w/ LEVEL TUBE – GEARBOX – TRANS-LEVEL – TRI 750 T150*
$15.30ASSEMBLY--DRAIN PLUG w/ LEVEL TUBE - GEARBOX - TRANS-LEVEL - TRI 750 T150* -
ASSEMBLY–DUAL LEAD COIL BRACKET ASSEMBLY – NOS*
$30.25ASSEMBLY--DUAL LEAD COIL BRACKET ASSEMBLY - NOS* -
ASSEMBLY–DUAL SEAT LATCH – OIL-IN-FRAME – 1971
$36.82ASSEMBLY--LATCH - DUAL SEAT LATCH - OIL-IN-FRAME -
ASSEMBLY–DYNAMO TERMINAL PLATE w/ SCREW – (KIDNEY-SHAPED TERMINAL PLATE)*
$15.50ASSEMBLY--PLATE w/ SCREW - DYNAMO TERMINAL - (KIDNEY-SHAPED TERMINAL PLATE)* -
-
-
ASSEMBLY–ENGINE OILFEED PIPE 1 FOOT c/w FERRULES – RUBBER – (NOT HERRINGBONE)*
$15.00ASSEMBLY--ENGINE OILFEED PIPE 1 FOOT c/w FERRULES - RUBBER - (NOT HERRINGBONE)* -
ASSEMBLY–EXHAUST CLAMP 1-3/8″ D-WASHER TYPE – CHROME (EA)
$9.74ASSEMBLY--EXHAUST CLIP 1-3/8" D-WASHER TYPE - N -
ASSEMBLY–EXHAUST CLAMP c/w NUT AND BOLT – STAINLESS – TRI T160*
$124.25ASSEMBLY--EXHAUST CLAMP c/w NUT AND BOLT - STAINLESS - TRI T160* -
ASSEMBLY–EXHAUST CLAMP WITH BOLT AND NUT – STAINLESS*
$124.25ASSEMBLY--EXHAUST CLAMP WITH BOLT AND NUT - STAINLESS* -
-
ASSEMBLY–EXHAUST CONNECTION PIPE ASSY w/TWO CLAMPS -TJW -NUTS BOLTS SOLD EXTRA
$65.86ASSEMBLY--EX CONN PIPE ASSEMBLY - TJ WASSELL ENGINEERING -
ASSEMBLY–EXHAUST FINNED CLAMP ASSEMBLY 26 CEI – CAN USE 71-0216
$30.09CLAMP - FINNED - 26 CEI * - CAN USE 71-0216 -
ASSEMBLY–EXHAUST PIPE CLIP c/w BOLT NUT WASHERS – TT – SOLD EACH
$16.25CLIP - EXHAUST PIPE - TT- SOLD EACH -
ASSEMBLY–EXHAUST VALVE LIFTER LEVER – BARE – REQUIRES O-RING 01-4523
$123.38ASSEMBLY--LEVER - EXHAUST VALVE LIFTER - N -
ASSEMBLY–EXHAUST-CLAMP 1-5/8″ D-WASHER TYPE ASSY -UK-MADE (EA) – SEE 70-2271S/S
$10.46ASSEMBLY--EXHAUST-CLAMP 1-5/8" D-WASHER TYPE c/w NUT AND BOLT - N -
-
ASSEMBLY–EXTENDED THROTTLE STOP SCREW c/w O-RING
$9.27ASSEMBLY--EXTENDED THROTTLE STOP SCREW c/w O-RING -
-
-
-
-
-
-
-
-
ASSEMBLY–FILTER – OILTANK – SHORT TYPE – (SUITS 1/2″) – PRE-1971 COMMANDOS
$48.26ASSEMBLY--FILTER - OILTANK * -
ASSEMBLY–FILTER BOLT 3″ LONG – OIL TANK – PLATED – POST-1970
$63.79ASSEMBLY--FILTER BOLT 3" LONG - OIL TANK - PLATED - POST-1970 -
-
ASSEMBLY–FINNED EXHAUST CLAMPS w/HARDWARE – STAINLESS (PR)
$121.21CLAMPS - EXHAUST - FINNED - STAINLESS (PR) -
ASSEMBLY–FIXED / NON-FOLDING KICKSTART LEVER c/w RUBBER – N
$250.00ASSEMBLY--FIXED / NON-FOLDING KICKSTART LEVER c/w RUBBER - N -
ASSEMBLY–FLASHER UNIT – 6V/18-23W c/w RUBBER BRACKET – (2 PIN SMALL)
$24.77ASSEMBLY--FLASHER UNIT - 6V/18-23W c/w RUBBER BRACKET*
